4PCS - Push Fit PPR Pipe Fittings, 20mm Quick Connect Water Pipe Connector, No Welding Hot Melt Free Plumbing Fitting
4PCS - Push Fit PPR Pipe Fittings, 20mm Quick Connect Water Pipe Connector, No Welding Hot Melt Free Plumbing Fitting
BUNDLE & SAVE
Couldn't load pickup availability
-
Ordered
- - -
Order Ready
- - -
Delivered
4PCS - Push Fit PPR Pipe Fittings, 20mm Quick Connect Water Pipe Connector, No Welding Hot Melt Free Plumbing Fitting
Join The Pipe. Skip The Hot-Melt Setup.
Water Under The Vanity. No Welder.
You spot water behind the vanity, but there's barely room for your hand—never mind a fusion iron. A small pipe repair shouldn't demand a machine you rarely use. These push-fit connectors join compatible 20mm PPR and PE lines without heat or glue, taking the welding setup out of the job.
Fix The Line. Keep Your Independence.
You'd rather handle a straightforward repair than arrange a call-out just to join two pipes. That's the point of this fitting: a mechanical connection without dedicated welding gear. Under a sink or along a greenhouse feed, you can make the connection without hunting for an outlet or waiting for a joint to cure.
Steel Teeth Do The Holding.
You don't need to trust a smooth plastic socket alone. Inside the rigid white body, stainless steel teeth grip the outside of your compatible 20mm pipe to resist pullout. Push the pipe fully home and those teeth provide the mechanical hold—without heat-fusing the two parts together.
Two Seals Between Water And Floor.
You want the joint to do more than hold together. Two internal O-rings seal against the pipe's outer surface, creating separate barriers against escaping water. The teeth handle retention; the rings handle sealing. That gives you a watertight connection without mixing glue or waiting for it to set.
Change The Route, Keep The Fitting.
Your pipe layout doesn't have to stay fixed forever. With the water shut off and pressure released, depress the green collar to release the pipe for a line alteration. Choose straight joins, 90-degree elbows, or handled shut-off valves to suit your job; each four-pack comes in your selected style.
Don't Meet Winter Empty-Handed.
Wait until a winter pipe split and you're looking for fittings while the hardware store is closed. Check your pipe size and put the right style in your repair kit before freezing weather arrives. At $19.99 for four fittings, you can keep compatible connectors on hand without buying a dedicated fusion machine.
Leave The Fusion Iron Behind
Skip the fusion iron. These 20mm connectors use steel locking teeth and two O-rings to grip and seal your pipe, with a release collar for later changes.
| thegiftnorth.com | Fusion fittings | |
|---|---|---|
| Heat-free pipe connections | ||
| No joint cooling wait | ||
| Push-release line changes | ||
| Stainless steel locking teeth | ||
| Double O-ring water seal |
Less Gear. More Getting It Done.
Check Your Pipe Before You Buy
Will these fit my 1/2-inch pipe?
Will these fit my 1/2-inch pipe?
Check the outside diameter, not just the nominal size. These fittings are designed for 20mm (0.79-inch) outer-diameter PPR and PE pipe. The 1/2-inch label does not mean they fit every 1/2-inch pipe material.
Do I receive all three fitting styles?
Do I receive all three fitting styles?
You receive four fittings in your selected style. Choose straight connectors for inline joins, elbows for 90-degree turns, or valves for manual shut-off. This is not an assorted pack of all three styles.
Do I need a welding machine or glue?
Do I need a welding machine or glue?
No fusion iron, torch, or glue is needed for the connection. The push-fit mechanism grips and seals the pipe mechanically, so there is no adhesive cure or heat-weld cooling period.
How do I connect the pipe safely?
How do I connect the pipe safely?
Shut off and depressurize the line first. Confirm pipe compatibility and follow the fitting's installation instructions. Seat the pipe fully, then check the connection for leaks when restoring water.