
Your Pump Isn't The Problem. The Angle Is.
Your Pump Head Hits The Rotor. Again.
You can see the valve, but you still can't get the pump head past the brake rotor. A simple pressure check turns into another wrestling match. These angled brass extenders redirect the connection, giving your nozzle a workable approach instead of another awkward squeeze.
Three Angles. Stop Forcing The Wrong One.
A sportbike rotor, a scooter rim, a deep-dish car wheel: each blocks your pump differently. Your set includes one 45°, one 90°, and one 135° extender, so you can choose the bend that clears the obstruction. Match the adapter to your wheel, not your patience to the problem.
Make The Connection Face Your Pump.
Getting around the rim is half the job; your pump still needs the right approach. The 360° rotating base lets you fine-tune the extender's orientation around spokes and brake discs. Secure the position with the knurled nut, then connect without fighting the wheel layout.
No Air Loss At The Connection
You line up the nozzle perfectly, then hear air hissing at the fitting. The built-in rubber seal inside each brass adapter locks in tight, stopping leakage before it starts. Twist it on, inflate, and walk away knowing the pressure stays where it should.
You Fix Things. Your Tools Should Help.
You keep a garage kit because you'd rather handle a pressure check yourself than hand off a simple job. The solid brass body has weight in your hand and resists wear through repeated use. Smooth threading and a knurled nut give you a connection you can grip and secure.
Stock All Three Angles Now
That cramped valve won't get easier to reach. Grab the full set—45°, 90°, and 135° brass extenders—before your next ride. At $19.99, you're covering every wheel layout your garage will throw at you. One kit solves the problem for good.
Give Your Pump Room
Compared with connecting directly to a cramped valve, these angled extenders give your pump more room and let you adjust its approach.
|   | thegiftnorth.com | Bare valves |
|---|---|---|
| Less pump-head wrestling in tight spaces | ||
| Extended reach beyond recessed valve positions | ||
| Angled access around spokes and rotors | ||
| 45°, 90°, 135° bend options | ||
| 360° adjustment at the adapter base | ||
| Knurled nut secures adapter position |
From Riders And Garage Toolkits
Before You Put Them To Work
Will these fit my motorcycle, scooter, bike, or car?
Will these fit my motorcycle, scooter, bike, or car?
They fit most standard Schrader valves used on cars, motorcycles, scooters, and bikes. Check your valve type and available wheel clearance before ordering; vehicle type alone does not guarantee fit.
Which angles come in the set?
Which angles come in the set?
You receive three brass extenders: one 45°, one 90°, and one 135°. Choose the bend that gives your pump head room around spokes, brake rotors, or a recessed rim.
How do I line up the extender with my pump?
How do I line up the extender with my pump?
Thread the adapter onto a compatible valve, use the 360° rotating base to line up your pump, and secure the knurled nut. Choose a bend that clears your wheel before inflating.
What helps prevent air escaping during inflation?
What helps prevent air escaping during inflation?
A built-in rubber ring seals the threaded connection to help reduce air escape during inflation. Seat the adapter snugly and check the connection before filling.