
The Small Fix For Slippery Screws
Stop Chasing Screws Mid-Job
That screw hits the floor just as you get the bracket lined up. Now you’re balancing a panel, reaching into a cabinet, or climbing down a ladder to find it. This compact magnetic collar keeps suitable steel screws seated at the bit tip, so your free hand can stay on the work.
Keep Your Free Hand On The Work
You work solo because the job still has to get done right. Hold the drywall, cabinet part, or furniture panel with one hand while the other drives, without pinching a tiny screw between your fingers. From ceiling repairs to flat-pack builds, the collar makes the fiddly part feel controlled.
Feel The Screw Snap Into Line
Slide it near the front of a compatible 1/4-inch hex bit and feel the screw settle flush with a crisp magnetic snap. The integrated high-flux ring projects pull through the tip, helping ferrous screws stay aligned instead of wobbling or falling. It can also hold multiple loose screws for repeat fastening.
One Collar, Several Compatible Bits
It fits compatible standard 1/4-inch (6.35 mm) hex bits used with screwdrivers and drill drivers. Slide it on, keep the bit tip exposed, and move the collar along the shank when clearance changes. At 1.00 inch long and 0.59 inch wide, it stores easily in a bit case or pouch.
Small Collar, Solid Workshop Feel
Cool matte anodized aluminum, an hourglass waist, and a smooth friction slide give you a firm grip while you reposition it. The lightweight 1-inch collar adds virtually no front-heavy drag, and the removable sleeve transfers between compatible bits as the job changes. Practical gear should stay out of the way.
Keep The Next Job Moving
Don’t wait for the next screw to vanish behind the cabinet or into the grass. Keep both collars in your kit for spring renovation work, a Father’s Day toolbox gift, or a Christmas stocking stuffer. Choose Green, Black, or Green+black and put magnetic support where the next job needs it.
A Better Bit-Side Helper
Ordinary holders leave you chasing dropped fasteners. This removable two-piece collar puts magnetic support at the bit tip, then moves with you from job to job.
|   | thegiftnorth.com | Basic holders |
|---|---|---|
| Strong magnetic screw hold | ||
| Removable between compatible bits | ||
| Standard 1/4-inch hex fit | ||
| One-handed overhead support | ||
| Compact bit-case storage | ||
| Contoured finger-slide collar |
What Our Customers Are Saying
Frequently Asked Questions
Will it fit my screwdriver or drill?
Will it fit my screwdriver or drill?
It is designed for compatible standard 1/4-inch (6.35 mm) hex screwdriver bits and drill-driver bits. Check the bit profile and exposed length before fitting.
Will it hold every screw?
Will it hold every screw?
No. Magnetic hold depends on the screw material, size, bit, and collar position. It is intended for magnetically responsive steel fasteners; non-magnetic stainless or brass screws will not be held magnetically.
How do I install it?
How do I install it?
Switch off the driver, slide the collar onto the hex shank, and position it near the front while leaving the bit tip exposed. Check the screw hold before driving.
Can I use it in recessed holes?
Can I use it in recessed holes?
Measure the working clearance first. The collar is about 0.59 inch (1.5 cm) wide, so it may not fit deeply counterbored or tightly recessed screw holes.